Innomar
Innomar Essential Parametric Sub-Bottom Profiler

Innomar Essential Parametric Sub-Bottom Profiler
Innomar Essential SBP model is intended to be used on small boats and uncrewed surface vehicles (USV / ASV) in inshore and nearshore environments. The high ping rate, a small footprint and the possibility of transmitting sound pulses over a wide frequency range ensure sub-bottom data with excellent resolution and very good sediment penetration.
Electronic beam stabilization across (roll) or along track (pitch) is used to compensate for wave-induced vehicle movements.
A user-friendly Windows data acquisition and system control software (SESWIN) is used for remote (Ethernet) operation. Innomar essential model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Technical Specifications
- Water depth range: 0.5 – 200 m
- Seabed penetration: up to 20 m
- Range resolution: up to 5 cm
- Depth accuracy: 2.5 cm + 0.08% water depth
- Motion compensation: Heave and Roll (±10°)
- Frequencies: 100kHz (HF) / 5 ‒ 15 kHz (LF)
- Primary source level: >236 dB//µPa re 1m
- Acoustic Power: c. 2.2 kW
- Beam width: c. 4° (±2°) roll × 8° (±4°) pitch for all frequencies
- Pulse type: CW, Ricker
- Pulse width: 0.07 ‒ 0.8ms
- Pulse rate: up to 30 Hz
- Digital, 2 channels (LF and HF, "SES3" format)
- Sample rate c. 100 kHz @ 24 bit; resolution <1 cm
- LF sub-bottom data: raw (full-waveform)
- HF data: processed (envelope)
- Power supply: 24V (20 ‒ 30V) DC; AC power adapter (100 ‒ 240V AC) included in Interface Unit
- Power consumption: typ. 20 W / max. 30 W